victron quattro 15000 watts 48v inverter charger
KSh650,000.00 Ex-VAT
- Multifunctional, with intelligent power management
- Two AC inputs and two AC outputs
- Three phase capability
- Split phase options
- PowerControl – Dealing with limited generator, shore side or grid power
- Unique PowerAssist – Boosting the capacity of shore or generator power
- Input Voltage range: 38 to 66 Volt DC
- Output voltage: 230 Volts AC +/-2% @ 50 Hz
victron quattro 15000 watts 48v inverter charger
KSh650,000.00 Ex-VATRequest a Call Back
- Ask a Question
victron quattro 15000 watts 48v inverter charger
KSh650,000.00 Ex-VATAsk a Question
victron quattro 15000 watts 48v inverter charger
Product Features
Multifunctional
Similar to the MultiPlus, the Quattro is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source.
Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split-phase operation and parallel operation.
Two AC Inputs & two AC Outputs
The Quattro can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads.
This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.
Unique PowerAssist feature
The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when an overload occurs. The second level will boost the output of a generator or shoreside supply with power taken from the battery.
Product Specifications
- Multifunctional, with intelligent power management
- Two AC inputs and two AC outputs
- Three phase capability
- Split phase options
- PowerControl – Dealing with limited generator, shore side or grid power
- Unique PowerAssist – Boosting the capacity of shore or generator power
- Input Voltage range: 38 to 66 Volt DC
- Output voltage: 230 Volts AC +/-2% @ 50 Hz
- Continuous output power: 15,000 Volt-Amps @ 77oF
- Zero load power: 110 Watts; 15 Watts in search mode
- Charge current (house battery): 200 Amps
- Dimensions: 22.5″ x 19.2″ x 13.5″ inches
- Weight: 158.7 pounds
- 5-year warranty
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
brand:
Related Products
- Model: MOD 10KTL3-X | MOD 11KTL3-X | MOD 12KTL3-X | MOD 13KTL3-X | MOD 15KTL3-X
- recommended PV power: 15000W | 16500W | 18000W | 19500W | 22500W
- DC voltage: 1100V
- Start Voltage: 200V
- Nominal voltage: 580V
- of MPP trackers: 2
- AC nominal power: 10000W | 11000W | 12000W | 13000W | 15000W
- Nominal AC voltage: 220V/380V, 230V/400V (340-440V) | 50/60 Hz (45-55Hz/55-65 Hz)
- PowerControl: YES
- PowerAssist: YES
- Transfer switch (A): 50A
- Parallel and 3-phase operation: YES
- Brand: Livguard
- Model Name: 4.0kva MPPT
- Capacity: 4000w
- Waveform: Pure Sine Wave
- Output Voltage: 220
- Rated AC power – 230V, Single phase.
- Max Supported Panel Power – 1600 Wp
- Max Input Voltage (Voc) – 44V
- Charge Controller – PWM, 50Amps
- Nominal Battery Bank Voltage – 24V
- Of Batteries Required – 2 No’s
- Has In-built MOSFET Switching Element
- Input Battery Voltage Range: 19 – 33 V
- Nominal AC Output Voltage: 230 VAC ± 2%
- Continuous Power Rating: 3000VA at 25 °C
- Peak Inverter Efficiency: 94%
- Waveform: Pure Sine Wave
- AC input Voltage Range: 187 – 265 VAC
- Frequency Range AC Input: 45 – 55 Hz
- Dimensions: 362x258x218mm
- Weight: 18kg
- Model 2KVA/2.5KVA/3.5KVA/5KVA/7.5KVA/10KVA/12KVA/15KVA
- AC Mains Mode
- Input Voltage Range (Eco Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
- Input Voltage Range (Inv. Mode) 180 to 260 VAC ± VAC
- Changeover Time Maximum < 30 ms (in Eco Mode) and < 10 ms (in Inv. Mode)
- Charging Current (NC) 5A± 1A
- Charging Current (HC) 22A ± 1A
- Boost Charging Voltage 14.4 ± 0.2 VDC per Batt.
- Float Charging Voltage 14.4 ± 0.2 VDC per Batt.
- Input Battery Voltage Range: 38-66V
- Nominal AC Output Voltage: 230VAC
- Continuous Power Rating: 5000VA
- Peak Inverter Efficiency: 95%
- Nominal DC Input Voltage: 48V
- Frequency Range AC Input: 45-65Hz
- Dimensions: 444x328x240mm
- Weight: 30kg
- Model: 650VA 850VA 1000VA 1450VA 2000VA
- Nominal Battery Voltage: 12 VDC 24 VDC
- Solar Panel Connected for 50 Amps
- PWM/MPPT* Charge Controller (Max.)
- 850Wp 1700Wp
- AC Mains Mode
- Input Voltage Range (Eco Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
- Input Voltage Range (Inv. Mode) 180 to 260 VAC ± VAC
- Model Name/Number: Livguar Inverter LG5000 48V Sine Wave ih-verter
- Model: LG5000 48V
- Brand: Livguard Inverter
- Warranty: 2 Years
- NUMBER OF BATTERY: 4
- Capacity: LG5000
- Model 650VA 850VA 1000VA 1450VA 2000VA
- Nominal Battery Voltage 12 VDC 24 VDC
- Solar Panel Connected to 50 Amps
- PWM/MPPT* Charge Controller (Max.)
- 850Wp 1700Wp
- AC Mains Mode
- Input Voltage Range (Eco Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
- Input Voltage Range (Inv. Mode) 180 to 260 VAC ± VAC
- Changeover Time Maximum < 30 ms (in Eco Mode) and < 10 ms (in Inv. Mode)
- Charging Current (NC) 5A± 1A
- Charging Current (HC) 22A ± 1A
Reviews
There are no reviews yet.