Solar Inverter Phoenix Inverter Compact 12V 1200VA
KSh54,300.00 Ex-VAT
- Input voltage range (V DC) 9.5 – 17V 19 – 33V 38 – 66V
- Output Output: 230V ± 2% / 50 / 60Hz ± 0.1% (1)
- Power cont. Output 25 ° C (VA) (2) 1200
- Power cont. Output 25 ° C (W) 1000
- Power cont. Output 40 ºC (W) 900
- Power peak (W) 2400
- Max efficiency 12/24/48 V (%) 92
- Vacuum consumption 12/24/48 V (W) 8
- Vacuum consumption in AES mode (W) 5
- Vacuum consumption Search mode (W) 2
Solar Inverter Phoenix Inverter Compact 12V 1200VA
KSh54,300.00 Ex-VATRequest a Call Back
- Ask a Question
Solar Inverter Phoenix Inverter Compact 12V 1200VA
KSh54,300.00 Ex-VATAsk a Question
Solar Inverter Phoenix Inverter Compact 12V 1200VA
The inverter Phoenix Inverter Compact is a pure sine wave inverter with high efficiency that is designed for professional service and suitable for a wide range of energy applications. The solar inverter Phoenix Inverter Compact is available from 1200VA to 2000VA in 12V or 24V.
News of the solar inverter Phoenix Inverter Compact 12V 1200Va
SinusMax – Superior design
Developed for professional use, the Phoenix range of inverters is ideal for countless applications. The criteria used in its design was to produce a true sinusoidal inverter with optimized efficiency but without compromising its performance. By using high-frequency hybrid technology, we obtain as a result a product of the highest quality, with compact dimensions, lightweight, and capable of supplying power, without problems, to any load.
Additional starting power
One of the unique characteristics of SinusMax technology is its very high starting power. Conventional high-frequency technology does not offer such extraordinary performance. Phoenix inverters, however, are well suited to power difficult loads, such as refrigerators, compressors, electric motors, and similar devices.
Virtually unlimited power thanks to parallel and three-phase operation
Up to 6 inverter units can operate in parallel to achieve higher output power. Six 24/5000 units, for example, will provide 24 kW / 30 kVA of output power. It is also possible to configure it for three-phase operation.
Transfer of the load to another source CA: the automatic transfer switch
If an automatic transfer switch is required, we recommend using the MultiPlus inverter/charger instead. The switch is included in this product and the MultiPlus charger function can be disabled. The computers and other electronic equipment will continue to operate without interruption since the Phoenix has a very short switching time (less than 20 milliseconds).
Interface for the computer
All models have an RS-485 port. All you need to connect to your PC is our MK2 interface (see the section “Accessories”) This interface is responsible for the galvanic isolation between the inverter and the computer and converts the RS-485 socket into RS-232. an RS-232 USB conversion cable, together with our VEConfigure software, which can be downloaded for free from victron.com, you can customize all inverter parameters, including voltage and output frequency, overvoltage settings, or Undervoltage and relay programming This relay can, for example, be used to signal several different alarm conditions or to start a generator.
The inverters can also be connected to VENET, the new power control network of Victron Energy, or to other computer monitoring and control systems.
New applications for high-power inverters
The possibilities offered by the high-power inverters connected in parallel are really amazing. To obtain ideas, examples, and calculations of battery capacity, please consult our book “Electricity on Board”, available for free at Victron Energy and downloadable
Parallel and three-phase operation Yes
Technical Specifications
- Input voltage range (V DC) 9.5 – 17V 19 – 33V 38 – 66V
- Output Output: 230V ± 2% / 50 / 60Hz ± 0.1% (1)
- Power cont. Output 25 ° C (VA) (2) 1200
- Power cont. Output 25 ° C (W) 1000
- Power cont. Output 40 ºC (W) 900
- Power peak (W) 2400
- Max efficiency 12/24/48 V (%) 92
- Vacuum consumption 12/24/48 V (W) 8
- Vacuum consumption in AES mode (W) 5
- Vacuum consumption Search mode (W) 2
General.
- Programmable relay (3): Yes
- Protection (4): a – g
- Bus communication port: For parallel and three-phase operation, remote supervision and system integration
- Common characteristics: Operating temperature: -20 to + 50 ° C (cooled by fan)
- Humidity (without condensation): Max. 95%
Case.
- Common characteristics: Type of protection: IP 21
- Battery connections: 1.5-meter battery cables included
- Connections 230 V AC: Plug G-ST18i
- Weight (kg): 10
- Dimensions (to x to x to p in mm.): 375x214x110
Regulations.
Security: EN 60335-1
Emissions / Immunity: EN 55014-1 / EN 55014-2
Automotive Directive: 2004/104 / EC
1) It can be set at 60 Hz, and at 240 V.
2) Non-linear load, crest factor 3: 1
3) Programmable relay that can be configured in general alarm, DC Undervoltage or as a start signal for a generator (the MK2 interface and the VEConfigure software are required)
Rated capacity 230V / 4A AC
Rated capacity CC 4 A up to 35VDC, 1
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
brand:
Related Products
- Input Battery Voltage Range: 38-66V
- Nominal AC Output Voltage: 230VAC
- Continuous Power Rating: 5000VA
- Peak Inverter Efficiency: 95%
- Nominal DC Input Voltage: 48V
- Frequency Range AC Input: 45-65Hz
- Dimensions: 444x328x240mm
- Weight: 30kg
- Rated AC power – 230V, Single phase.
- Max Supported Panel Power – 8 KWp
- Max Input Voltage (Voc) – 216V
- Charge Controller – PWM, 50Amps
- Nominal Battery Bank Voltage – 120V
- Of Batteries Required – 10 No’s
- Has In-built MOSFET Switching Element
- Model 650VA 850VA 1000VA 1450VA 2000VA
- Nominal Battery Voltage 12 VDC 24 VDC
- Solar Panel Connected to 50 Amps
- PWM/MPPT* Charge Controller (Max.)
- 850Wp 1700Wp
- AC Mains Mode
- Input Voltage Range (Eco Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
- Input Voltage Range (Inv. Mode) 180 to 260 VAC ± VAC
- Changeover Time Maximum < 30 ms (in Eco Mode) and < 10 ms (in Inv. Mode)
- Charging Current (NC) 5A± 1A
- Charging Current (HC) 22A ± 1A
- Rated AC power – 230V, Single phase.
- Max Supported Panel Power – 1600 Wp
- Max Input Voltage (Voc) – 44V
- Charge Controller – PWM, 50Amps
- Nominal Battery Bank Voltage – 24V
- Of Batteries Required – 2 No’s
- Has In-built MOSFET Switching Element
- Power (2 AC Outlets): 600W Rated,1200W peak
- Max Efficiency 90%
- THD ≤3%
- USB output: 1xDC 5V/2.1A(max)
- Output wave form: Pure sine wave
- Nominal input voltage:12V(9.8-16VDC)
- Nominal output voltage: 110-120VAC
- Internal fuses:30A
- Battery cables(9AWG): one pair with a length of 2 ft.
- Remote controller: remote controller with 15ft cable. More convenient to control the inverter ON/OFF
- No load current:0.7A
- Rated AC power – 230V, Single phase.
- Max Supported Panel Power – 1600 Wp
- Max Input Voltage (Voc) – 44V
- Charge Controller – PWM, 50Amps
- Nominal Battery Bank Voltage – 24V
- Of Batteries Required – 2 No’s
- Has In-built MOSFET Switching Element
- Multifunctional, with intelligent power management
- Two AC inputs and two AC outputs
- Three phase capability
- Split phase options
- PowerControl – Dealing with limited generator, shore side or grid power
- Unique PowerAssist – Boosting the capacity of shore or generator power
- Input Voltage range: 38 to 66 Volt DC
- Output voltage: 230 Volts AC +/-2% @ 50 Hz
- Model: 650VA 850VA 1000VA 1450VA 2000VA
- Nominal Battery Voltage: 12 VDC 24 VDC
- Solar Panel Connected for 50 Amps
- PWM/MPPT* Charge Controller (Max.)
- 850Wp 1700Wp
- AC Mains Mode
- Input Voltage Range (Eco Mode) 100 to 280 VAC ± 5 VAC (Wide Range)
- Input Voltage Range (Inv. Mode) 180 to 260 VAC ± VAC
- Input Battery Voltage Range: 19 – 33 V
- Nominal AC Output Voltage: 230 VAC ± 2%
- Continuous Power Rating: 1600VA @ 25 °C
- Peak Inverter Efficiency: 94%
- Waveform: Pure Sine Wave
- Nominal DC Input Voltage: 24V
- AC input Voltage Range: 187-265 VAC
- Frequency Range AC Input: 45 – 55 Hz
- Dimensions: 375x214x110mm
- Weight: 10kg
Reviews
There are no reviews yet.