BlueSolar charge controller MPPT 150/85 CAN-bus

The Blue Solar Charge Controller MPPT 150/85 CANBUS charge controller is able to charge a lower nominal voltage battery from a higher nominal voltage PV array.
The controller will automatically adjust to a 12, 24, or 48-v nominal battery voltage.

Synchronized parallel operation of up to 25 units

Interconnect the charge controllers with RJ45 UTP cables and they will automatically

synchronize.

Charge process controlled by a Multi or Quattro

Connect the charge controller to a Multi or Quattro and build a Hub-1 off-grid or grid-interactive self-consumption system.

Remote on/off connector

Less wiring and no additional Cyrix relay are needed in a system with Li-ion batteries.

Ultra-fast Maximum PowerPoint Tracking (MPPT)

Especially in the case of a clouded sky, when light intensity is changing continuously, an

ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM

charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points may be present on the

power-voltage curve.

Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.

The innovative BlueSolar algorithm will always maximize energy harvest by locking to

the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).

Flexible charge algorithm

Several preprogrammed algorithms. One programmable algorithm.

Manual or automatic equalization.

Battery temperature sensor. Battery voltage sense option.

Programmable auxiliary relay

For alarm or generator start purposes

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.

PV short circuit and PV reverse p

Product Features

Datasheet