Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

KSh19,000.00 Ex-VAT

+
  • Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

    Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

    KSh19,000.00 Ex-VAT

    Request a Call Back

    •  Ask a Question
      Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

      Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

      KSh19,000.00 Ex-VAT

      Ask a Question

        ... people are viewing this right now

        Share
      Guaranteed Safe Checkout

      Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor

      The SPD is offered in three different voltages to maximize the required protection level. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain without damaging any electronics in the system. The MNSPD is designed to clamp a 115,000 amp surge! Blue LEDs provide a visual indication of operation from a distance.

      The Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor is a welcome replacement for less sophisticated arrestors that have been the mainstay of the industry for many years.

      It is a 300V Surge Protector Device (MNSPD) a Type 1 device designed for indoor and outdoor applications. Engineered for both AC and DC electric systems, it provides protection to service panels, load centers, or where the SPD is directly connected to the electronic device requiring protection. Protection for Classic and other charge controllers, off-grid PV combiners, and 120/240 VAC circuits.

      The MidNite Solar Advantage

      Due to the growing solar industry, there are numerous listed SPDs entering the market. These new din rail mount SPDs, like the MidNite versions, are much better at clamping surges to a safe voltage level than previously available lightning arrestors. However, din rail SPDs are physically small and typically can only provide 1/8th the protection of the MidNite product.

      When exposed to transients above their capability, permanent damage occurs. Din rail SPDs are always mounted inside of a box such as a PV combiner up on a rooftop. When the din rail SPD fails from a near lightning strike, it just quits working. This means that it also quits protecting. Since it is locked away inside of a box, you have no way of knowing it has failed until your next lightning storm!

      The Midnite SPDs are mounted on the outside of a PV combiner and have blue LEDs viewable from a distance that show your system is still protected.

      The MidNite SPDs are built to last. Each MNSPD is capable of clamping a 115,000 amp surge. In the event that the MNSPD does eventually wear out, it can easily be repaired.

      Product Specifications

      PART NO. MNSPD-300-AC
      Nominal Voltage 0 to 250 VAC
      MCOV VRMS @1mA 470V (423-517)
      ClamAV @ 100A Current 8/20µs 775V
      I peak (8/20µs) (Current) 115kA (Full Device)
      57.5kA (Each Section)
      Energy Absorption 3130 J (Full Device)
      1560 J (Each Section)
      Suggested Placement 120/240VAC circuits
      Diagnostics Dual Operating LED Indicators. When voltage is present Operating Temperature Range -40°c to +85°c
      Nominal Discharge Current INA 57.5kA
      Thermal Disconnector Internal
      Response time <1micro sec

      Based on 0 reviews

      0.00 Overall
      0%
      0%
      0%
      0%
      0%
      Be the first to review “Midnite MNSPD-300v AC Surge Protector-Lightning Arrestor”

      Your email address will not be published. Required fields are marked *

      Write a review

      Reviews

      There are no reviews yet.

      brand:

      Category:
      Close
      pamsec-solutions-paybill
      Categories
      Close My Cart
      Close Recently Viewed
      Close
      Close
      Categories